Видео

I'm sorry but you don't make the setting of this machine correctly. You do too much pressure on the guide pulleys. The pressure screw does not tighten the handle with such a large force, but it must be tightened so that the locking mechanism (lever) slightly clicked the locking system. This very strong tightening of the screw will destroy the gearbox very soon. I know this machine very well from practical use as well as maintenance and repair.

I could have a dart in the workshop without people crackin the shits at me 😮

80mm plate on a laser is insane! How does the machine maintain focal distance as the beam drops?

Fajne to ale bardzo drogie jak na tak małe urządzenie:(

Can you demonstrate how you would correct if the part is full length and it’s 90 degrees at each end but the middle is a few degrees off from 90?

Thank you

Muppet

good machine

Sounds like iwata tornado fan

CLICK HERE TO PURCHASE - Measumax MX-30i Digital Readout www.machineryhouse.com.au/q8500

How much?

That is NOT a cabinet scraper

instructions unclear, theres a dent in my cylinder head

Great video 👍

Mine broke, the tip grinded down. Have you ever had that happen? Didn’t even apply much pressure

Witam Państwa.ineresuje mnie cena tego zestawu

I always put a wooden board on the bed when changing chucks.

Price?!

By the language this guy is using he must be a salesman and not a machinist. As a machinist he is painful to listen to. It’s like he is selling to someone who has never touched a lathe. Like someone wanting to buy a table saw at Home Depot and is thinking about buying it to do home Reno’s 🤣

Great

Would have loved to see a bend using 30mm RHS. Can it be done?

How can we buy

Esta disponible en para latinoamerica Donde puedo tener mas informacion Que costo tieme? Gracias

Super helpful! Thank you!

It's different.

Is the motor solid bearing or ball bearing?

available in Canada?

Does this need to change belt placement for speed change?

Présenter un tour, c'est bien, mais travailler avec c'est mieux Vidéo inutile

Air nibbler and then a hand punch? Just use a pneumatic punch.

CAn you confirm that compressor you have will run the sandblast cabinet? What is the FAD?

When the blocks are with the V up and you bend a bar as shown, what’s to stop the blocks from shooting off to the sides when the bar bends downward?

typical hype, everything except the price, bonehead

What angle?

Could this be put in a domestic home with a 240 power supply??

Great ad for Hypertherm, well done. Sweet FA about Swiftcut or the table though. And why the hell does every manufacturer use the same type of BS music, give it a farking rest. Ooool it's punchy! like a lobotomy for cardboard cutout dumbos. Those geniuses in marketing, formulaic, stale and generally a great display of a complete inability to think outside the box....

i loved the response i got from northmead when i turned up with the faulty shaft II from inside mine. yknow, big crack running down the length of it? from the factory as you can see where it was ground afterwards? and instead of honouring ausstralian consumer laws, and replacing said DEFECTIVE PART FREE OF CHARGE? bruce or brian, whatever his name was... "what do you expect us to do about it?" then strangely, after providing the link to the item on the site itself, he refused to even sell it to me without "the serial number". followed by somehow the price increasing to just shy of $200 when i looked it up a few weeks later. yeah. thats the customer service that EVERYONE has come to expect from northmead H&F. wage earners with no desire to help, assist, or provide any support.

how about you guys inform the factory that they are machining the tailstocks backwards? if i had looked at that when i bought it, i would have demanded a replacement that has some overhang where its needed so you can actually turn between centers. or gotten a different model. the 346 has a "standard" tailstock with the overhang facing in the direction its required... maybe theyll fit? but if i head to the showroom, do you reckon theyll even let me try? nope. even the line drawing in the parts diagram shows it oriented the correct, standard way, rather than being backwards with a flush front so it has no overhang and always gets in the way. but then again, H&F has a reputation for excellent customer service, so i dont expect anything to change anytime soon. how long have they been making and selling this model with its backwards machined tailstock? bit late now, huh? i definitely wouldnt expect them to say... supply a correctly machined tailstock that can actually be used, to all customers that have purchased one of these, if they wanted one. much the same reason im making that new shaft inside the hm46, that when i showed up to the northmead showroom with the shaft with manufacturing defect, the thing has a crack running down the length of it, obviously from the factory as its been ground AFTERWARDS, but "brian", or maybe it was "bruce", simply looked at me and stated "what do you expect us to do about it?" you are expected to REPLACE DEFECTIVE TIMES AS PER AUSTRALIAN CONSUMER LAWS, thats what i expect you to do about it. i seriously contemplate going back, recording the conversation and approaching the ombudsman over this. i can handle a bandsaw blade breaking, thats normal. but a critical internal part of a machine, that it RELIES upon, and is DEFECTIVE... havent been back to H&F since then, and i wont be returning anytime soon. your impeccable record of customer service has lost me. and well, i dont seem to be the only person with my experience, from what i hear in the mens sheds, in lunch rooms, down at hornsby model engineers shop... i am yet to meet ANYONE with a positive thing to say about H&F and their customer support. anyway. every other lathe in your line has it done properly from what i see. just the 336 stands apart with this nonsensical tailstock design. surprised the place is even in business. maybe they have a better rep in other cities, but northmead has a long upheld tradition of employing arseholes that have absolutely no interest in assisting anyone, whether it be advice, help, or simply honouring australian consumer laws regarding faulty products and manufacturing defects.

I learned! Cheers mate.

Can cut steel?

How to change lead in by the one time

Is it Vaseline your using and will it do a will it do a 15nich knife

Oh no, not belt driven. I require geared head, I’ve had a lifetime of damn slipping belts!

What's with the substantial misalignment between the start and finish of the "u" in Cut ? Ditto with the start and finish of the "f" in Swift.

Good Boos

Best training video

I’m trying to find the thread size in a hole and it seems like it’s impossible

I always ran them backwards for cleaning to spare the cutting edges. do they all have a front and back? what happens if you use the wrong type for a job?

I was thinking I'd finally found a good lift but it's too short for the Kawasaki KLR 650 and the Enfield Classic 500.